Locations

Metal Coaters, founded in 1987, is one of the largest coil coating companies in the United States, with light gauge Coil Coating facilities strategically located in Marietta GA, Jackson MS, Middletown OH, Rancho Cucamonga CA, and Cambridge OH. Metal Coaters also operates heavy gauge Coil Coating facilities in Houston TX and Memphis TN, under the name of Metal Prep. 

Metal Coaters Cambridge

The Metal Coaters Cambridge Ohio facility was acquired in 2015 and was fully integrated into Metal Coaters in 2018.

Metal Coaters Cambridge is a proven industry leader in the prepainted aluminum market and specializes in small quantity, high complexity architectural requirements.

The facility covers over 245,000 square feet of manufacturing and warehouse space. The coil coating line itself is 480 feet long, two stories tall and requires 1,500 lineal feet of metal substrate to reach from entry to exit.

Contact Info:

Address: 530 North 2nd Street, Cambridge, OH 43725

Direct Phone: 740-432-7351

Fax Number: 740-439-7456

Shipping & Receiving: 740-435-2238

Email: sales@metalcoaters.com

Paint Line:

Gauge Width ID OD
Steel .009 – .079 18"– 62.5" 20 or 24 72" max
Aluminum .017 – .080 18"– 62.5" 20 or 24 72" max
End use information required on all aluminum inquiries over .032
Maximum coil weight: 40,000# for paintline
Minimum weight per linear foot: 1.0#
Maximum weight per linear foot: 13#

Slitter Line:

Gauge Width ID OD
Steel .016 – .080 62" max(1) 20 or 24 60" max
Aluminum .016 – .080 62" max(1) 20 or 24 60" max
Special inquiry required for different gauge and width combinations
Maximum weight for slitter and embosser: 30,000#
(1) Slitting widths over 60" require special inquiry

Embossing Line:

Gauge Width ID OD
Steel .009 – .030 48" max 20 or 24 60" max
.031 – .038 48" max 20 or 24 60" max
.039 – .048 24" max 20 or 24 60" max
Aluminum .017 – .040 48" max 20 or 24 60" max
.041 – .050 48" max 20 or 24 60" max
.051 – .064 48" max 20 or 24 60" max
Special inquiry required for different gauge and width combinations
Maximum weight for slitter and embosser: 30,000#
(1) Slitting widths over 60" require special inquiry

Metal Coaters Ohio

The Metal Coaters Ohio facility was acquired in 2011 and specializes in the Toll Processing of steel and aluminum coils.

The facility covers over 154,000 square feet of manufacturing and warehouse space. The coil coating line itself is 624 feet long, three stories tall and requires 3,200 lineal feet of metal substrate to reach from entry to exit.

Facility capabilities include rail receipt of coil.

Rail carrier: CSX. Customer Information Number: A00083987.

Contact Info:

Address: 2400 Yankee Road Middletown, OH 45044

Direct Phone: -937-584-3300

Toll Free: 877-669-3602

Shipping & Receiving: 937-584-3327

Fax Number: 937-584-3324

Email: sales@metalcoaters.com

Paint Line:

Incoming Coil Limits
Max. Coil Weight: 60,000 lbs
Min Coil Length: 3,000 LF
Max Coil OD: 86"
Max Strip Width: 56"
Min Strip Width: 20"
Max Stip Thickness: 0.060"
Min Strip Thickness 0.010"
Min Coil ID Sizes 20"
* May vary based upon order substrate thickness

Finished Coil Limits
Max. Coil Weight: 40,000 lbs
Min. Coil Length: 3,000 LF
Max. Coil O.D: 86"
Coil I.D. Size: 20, 24"

Embossing Line:

Incoming Coil Limits
Max. Coil Weight: 30,000 lbs
Max. Strip Width: 48"
Min. Strip Width: 15"
Max. Strip Thickness: 0.060"
Min. Strip Thickness: 0.010"
Max OD Size: 65"
Required Coil ID: 20"
Required Coil I.D. Size: 20.0 inches

Finished Coil Limits
Max. Coil Weight: 30,000 lbs
Max. Coil O.D: 65"
Coil I.D. Size: 20"
Stucco Pattern: Non-Directional

Metal Coaters Georgia

The Metal Coaters Georgia facility was acquired in 1987, serves as the foundation of Metal Coaters’ nationwide network of light gauge coil coating facilities and specializes in the toll processing of customer owned steel and aluminum coils for small and large runs of high complexity paint systems.

The facility covers over 225,000 square feet of manufacturing and warehouse space. The paint line is 450 feet long, two stories tall and requires 1,400 lineal feet of metal substrate to reach from entry to exit.

Facility capabilities include rail receipt of coil.

Rail carrier: Carrier: GNRR.

Elizabeth, GA 30062.

Contact Info

Address: 1150 Marietta Industrial Dr, Marietta, GA 30062

Toll Free: 800-669-0624

Fax Number: 678-581-5656

Shipping & Receiving: 770-426-2142

Email: sales@metalcoaters.com

Paint Line:

Incoming Coil Limits
Max. Coil Weight: 30,000 lbs
Max. Strip Width: 57"
Min. Strip Width: 20"
Max. Strip Thickness: 0.060” (Steel), 0.050” (Alum)
Min. Strip Thickness: 0.010” (Steel), 0.019” (Alum)
Min. Coil I.D. Sizes: 20”-24”
Max. Coil OD Size 72“
Min Coil ID Sizes 2,000 lineal feet*
* May vary based upon order substrate thickness

Finished Coil Limits
Max. Coil Weight: 30,000 lbs
Min. Coil Length: 2,000 LF
Max. Coil O.D: 60"
Coil I.D. Size: 20"

Slitter Line:

Incoming Coil Limits
Max. Coil Weight: 45,000 lbs
Min. Coil Length: 2,000 lineal feet*
Max Strip Width 60"
Min Strip Width 5”
Max Strip Thickness 0.060” (Steel), 0.050” (Alum)
Min Strip Thickness 0.010” (Steel), 0.019” (Alum)
Max OD Size 72"
Required Coil I.D. Size: 20”-24”
* May vary based upon order substrate thickness

Finished Coil Limits
Max. Coil Weight: 45,000 lbs
Max Coil OD Size 72"
Coil ID Size 16”,20”,24”
Max Slit Width 60"
Min Slit Width 2.0"
Slit Width Tolerance +/- 0.005"
Min Trim Required 1/4"
No. of Slitting Cuts 16-21 max.

Stucco Embossing Line:

Incoming Coil Limits
Max. Coil Weight: 30,000 lbs
Min. Coil Length: 2,000 lineal feet*
Max Strip Width 60"
Min Strip Width 20"
Max Strip Thickness 0.042” (Steel), 0.050” (Alum)
Min Strip Thickness 0.013” (Steel), 0.015” (Alum)
Max OD Size 72"
Required Coil I.D. Size: 20”-24”

Finished Coil Limits
Max. Coil Weight: 30,000 lbs
Min. Coil Length: 1,000 lineal ft*
Max. Coil O.D: 72”
Coil I.D. Size: 20, 24”
Stucco Pattern: Non-Directional
Stucco Depth: (up to .0359”) Inquire
Stucco Depth: (.0360-.0429”) Inquire
Seville Pattern 101 Inquire on Depth
* May vary based upon order substrate thickness
** Stucco depth based upon order strip width.

Metal Coaters Mississippi

Metal Coaters Mississippi was commissioned in 1995, as a 50/50 joint venture. In 2000, Metal Coaters was acquired 100% of the facility to service its customers more effectively.

Metal Coaters Mississippi is one of the largest coil coating lines in the Southern United States that specializes in Toll Processing of customer owned steel coils.

The facility covers over 360,000 square feet of manufacturing and warehouse space. The coating line is three stories tall and requires over 3,500 lineal feet of coil to reach from entry to exit. The facility also includes a rail spur dock that allows for the unloading of up to 10 rail cars inside the building. There is similar space for the unloading/loading of trucks inside the building.

Facility capabilities include rail receipt of coil.

Rail carrier: Carrier: CN. Click or rail spur BY90.

Contact Info

Address: 951 Prisock Road, Jackson, MS 39272

Toll Free: 800-858-1203

Shipping & Receiving: 601-346-5446

Fax Number: 601-371-7951

Email: sales@metalcoaters.com

Paint Line:

Incoming Coil Limits
Max. Coil Weight: 50,000 lbs
Min Coil Length: 2800
Max Coil OD: 72"
Max Strip Width: 62"
Min Strip Width: 28"
Max Stip Thickness: .060”
Min Strip Thickness .010
Min Coil ID Sizes 20"
* May vary based upon order substrate thickness

Finished Coil Limits
Max. Coil Weight: 40,000 lbs
Min. Coil Length: 2800’
Max. Coil O.D: 68"
Coil I.D. Size: 20, 24"

Slitter Line:

Incoming Coil Limits
Max. Coil Weight: 50,000 lbs
Max Strip Width 60"
Min Strip Width 10”
Max Strip Thickness .060”
Min Strip Thickness 0.009"
Max OD Size 68"
Required Coil I.D. Size: 20,24”
* May vary based upon order substrate thickness

Finished Coil Limits
Max. Coil Weight: 40,000 lbs
Max Coil OD Size 68"
Coil ID Size 20”
Max Slit Width 60"
Min Slit Width 1.5"
Slit Width Tolerance .010"
Min Trim Required .5"
No. of Slitting Cuts 18

Embossing Line:

Incoming Coil Limits
Max. Coil Weight: 50,000 lbs
Max. Strip Width: 60"
Min. Strip Width: 10"
Max. Strip Thickness: .060"
Min. Strip Thickness: .009"
Max OD Size: 68"
Required Coil I.D. Size: 20, 24"

Finished Coil Limits
Max. Coil Weight: 40,000 lbs
Max. Coil O.D: 68"
Coil I.D. Size: 20"
Stucco Pattern: Non-Directional

Metal Coaters California

The Metal Coaters California facility was acquired in 1998 and specializes in toll processing of customer owned steel and aluminum coils for small and large runs of high complexity paint systems.

The facility covers over 125,000 square feet of manufacturing and warehouse space. The coil coating line itself is 425 feet long, two stories tall and requires 1300 lineal feet of metal substrate to reach from entry to exit.

Facility capabilities include rail receipt of coil.

Rail carrier: Carrier: BNSF. Click or rail spur 1362.

Contact Info

Address 9123 Center Avenue Rancho Cucamonga, CA 91730

Toll Free: 800-841-4565

Shipping & Receiving: 909-758-4465

Fax: (909)989-7077

Email: sales@metalcoaters.com

Paint Line:

Incoming Coil Limits
Max. Coil Weight: Substrate Width, up to 35.999” - 20,000 lbs
Substrate Width, from 36.0” - 39.999” - 24,000 lbs
Substrate Width 40.0” & greater - 27,500 lbs
Max. Strip Width: (up to 0.0399”) - 52.0 inches
(0.040” & greater) - 54.0 inches
Min. Strip Width: 24.0 inches
Max. Strip Thickness: 0.060” (Steel), 0.080” (Alum)
Min. Strip Thickness: 0.0085” (Steel), 0.019” (Alum)
Min. Coil I.D. Sizes: 16”, 20”, 24”
Min. Coil Length: 2,000 lineal feet*
* May vary based upon order substrate thickness

Finished Coil Limits
Max. Coil Weight: 20,000 pounds
Min. Coil Length: 2,000 lineal feet*
Max. Coil O.D: 60.0 inches
Coil I.D. Size: 20.0 inches

Slitter Line:

Incoming Coil Limits
Max. Coil Weight: 20,000 pounds
Min. Coil Length: 2,000 lineal feet*
Min. Strip Width: 54.0 inches
Min. Strip Width: 18.0 inches
Max. Strip Thickness: 0.060” (Steel), 0.080” (Alum)
Min. Strip Thickness: 0.0085” (Steel), 0.019” (Alum)
Max. Coil O. D. Size: 60.0 inches
Required Coil I.D. Size: 20.0 inches
* May vary based upon order substrate thickness

Finished Coil Limits
Max. Coil Weight: 20,000 pounds
Max. Coil O.D: 50.0 inches
Coil I.D. Size: 20.0 inches
Max. Slit Width: 53 5/8 inches
Min. Slit Width: ½ inches
Slit Width Tolerance: +/- .005 inches
Min. Trim Required: 3/8 inches
No. of Slitting Cuts: 32 max.
Slit Coil Auto Stack: 17.0 inches max.
Slit Coil Auto Band: 3,500 pounds max.

Embossing Line:

Incoming Coil Limits
Max. Coil Weight: 20,000 pounds
Min. Coil Length: 2,000 lineal feet*
Max. Strip Width:(up to .0359”) (.0360 -.0429”) 548.0 inches
36.0 inches
Min. Strip Width: 24.0 inches
Max. Strip Thickness: 0.0429” (Steel), 0.060” (Alum)
Min. Strip Thickness: 0.0085” (Steel), 0.019” (Alum)
Max. Coil O. D. Size: 60.0 inches
Required Coil I.D. Size: 20.0 inches

Finished Coil Limits
Max. Coil Weight: 20,000 pounds
Min. Coil Length: 1,000 lineal ft*
Max. Coil O.D: 60.0 inches
Coil I.D. Size: 20.0 inches
Stucco Pattern: Directional
Stucco Depth: (up to .0359”) 10 mils max**
Stucco Depth: (.0360-.0429”) 8 mils max**
* May vary based upon order substrate thickness
** Stucco depth based upon order strip width